What to do if the belt conveyor spills material

Belt conveyor conveying capacity is very large, sometimes there will be a situation of spilling, why the belt conveyor will be spilling? How to deal with it if the material is scattered? Today we will continue to explain the content of this aspect.
1, the belt conveyor running out of material

Belt conveyor belt in operation is generally in the center line of the machine, sometimes due to the use of too long a lack of maintenance or conveying too much material, belt deformation, then the belt conveyor may appear to run off the situation, the belt conveyor run off the time it is difficult to operate normally, there is often a scattering of materials, then this time to find out the reason for running off the road to solve the problem of running off the road will not be scattered again.
2, concave section of the belt overhang when the material scattered

Concave section of the belt interval when the concave section of the radius of curvature is small will cause the belt to overhang, at this moment the belt into the groove condition change, because the belt has left the groove roller group, usually smaller groove angle, there will be a situation of spreading material. Therefore, in the planning stage should be able to choose a larger concave section radius of curvature to prevent the occurrence of such a situation.
3, the turning point of the material

Turning point of the situation is generally in the fall of the material, these positions such as hoppers, troughs, if the belt conveyor overload, it will cause damage to the rubber baffle, the material will be rushed out of the trough in the long term, the occurrence of spilling, in this case, we have to work in accordance with the design of the conveyor conveyor belt conveyor, can not be overloaded, and found that the baffle damage to be timely maintenance and replacement.