Product Details:
Payment & Shipping Terms:
|
Product Name: | Dry Sand Mining Inclined Cleated Belt Conveyor Fully Enclosed 70-278 Ton Per Hour | Frame Material: | Carbon Steel Stainless Steel |
---|---|---|---|
Material Feature: | Heat Resistant | Application: | Mining,stone |
Load Capacity: | 70-278t/h | Belt Material: | Rubber |
High Light: | incline conveyor systems,incline conveyor |
The universal belt conveyor is mainly composed of several parts, such as a frame, an adhesive tape, an electric roller, a supporting roller, a tensioning device and a support frame. After the tape passes through the rollers at both ends, the two ends are joined together with a tape clip or a vulcanization method to make the closed loop structure. The tape is supported by the upper and lower supporting rollers, and the tape is tightened by a tensioning device with a certain tension. When the drum motor rotates, the friction between the drum motor and the adhesive tape is continuously operated with the tape, thereby unloading the cargo loaded on the tape from the unloading drum.
The inclined belt conveyor is mainly composed of several major components, such as a driving device, a transmission roller, a redirecting roller, a conveyor belt, a roller component, a tensioning device, a supporting member, and a safety protection device. The features are below:
1.Easy loading and unloading. The belt conveyor can be loaded and unloaded at any point according to the needs of the process.
2.Strong adaptability to the line. The conveying line can be horizontal or inclined, or it can be bent horizontally or vertically, so it is less restricted by terrain conditions.
3.High reliability. Due to the simple structure and the light weight of the moving parts, as long as the conveyor belt is not torn, the service life can be as long as ten years, and the metal structural parts will not be damaged for decades if they are rust-proof.
4.Less maintenance costs. The moving parts of the belt conveyor are only rollers and idlers, and the conveyor belt is very wear-resistant. Compared to other conveying machines, there are far fewer wear parts.
In addition, the belt conveyor also features low operating costs, low capital investment, low energy consumption, and high efficiency.
Material to be processed: _____
Handling capacity:_____
Bulk Density: _____t/m3
Material temperature: _____℃
Water content:____%
Material is corrosive or not: ____
Material is sticky or not: ____
Working environment temperature: ______ ℃
Working voltage:____V_____hz_____phase
Belt Width | Section Form | Speed | Max Capacity |
800mm | Though | 1.0m/s | 278t/h |
1.25m/s | 348t/h | ||
1.6m/s | 445t/h | ||
2.0m/s | 546t/h | ||
Flat | 0.8m/s | 118t/h | |
1.0m/s | 147t/h | ||
1.25m/s | 184t/h | ||
1.6m/s | 236t/h | ||
2.0m/s | 289t/h |
Contact Person: Emily
Tel: +8618336080842