Payment & Shipping Terms:
|Type:||Cleated Belt Conveyor||Material:||Carbon Steel|
|Application:||Bulk Material||Product Name:||Belt Inclined Cleated Belt Conveyor|
84 M3/H Sidewall Belt Conveyor,
11 M3/H Sidewall Belt Conveyor,
84M3/H Inclined Bucket Conveyor
The structure is simple, and the main parts can be used with the general conveyor belt, which is convenient for use and maintenance
The conveyor belt with corrugated rib and diaphragm plate can reach 90 ° conveying angle.
Large conveying capacity. Because the conveyor belt has corrugated rib, its loading end face increases, and the conveying capacity is larger than that of general belt conveyor at the same inclination angle
The operation is stable and reliable, its reliability is almost equal to that of general belt conveyor, and the noise is low. As the conveying parts move on the roller, the noise can be ignored
Low energy consumption. Due to the absence of digging resistance during loading and internal and external friction resistance of materials during operation, the total installed power is significantly reduced compared with other conveying equipment with the same conveying capacity
Belt conveyors are not allowed to overload run.
Check wear condition of the belt, the damaged should be repaired.
Operators should circuit to inspect to close observe belt conveyor running. Especially,temperature rise and noise of main motor and the brake working whether they are normal; contact state of the brake and oil level, noise of gear unit and run off of belt should be noticed;temperature rise and noise of all bearings and state of all transition loads point should be noticed;
notice to see whether the hopper are blocked, working state of pulley, idler, belt cleaner, take-ups and control equipment.
Operators should make good record if any abnormal. The belt conveyor should be stoppe on emergency.
Periodic overall: Minor overall should be once every monthes besides ordinary maintenance Overhaul should be once half past year or once every year.
Contact Person: Emily